August 16, 2023
Description
The BTT UPS 24V V1.0 is good, but it definitely needs an enclosure to be installed in. An ideal solution would probably have it share an enclosure with the main board or something, but that would limit its compatibility.
So here's a stand-alone case that mounts directly to 40mm V-Slot extrusion that may make up the base of your printer!
Parts provided in print orientation, some supports required on the bottom rail of the base piece. There is a (rather bright) status LED on the UPS, so on lighter colored filaments like the red I used, it will be visible through the top.
License:
Creative Commons — Attribution — Share Alike
7
Smiksky
