May 27, 2023
Description
Remixed the amazing model made by Bugsy515 in order to make it easier to print as i kept getting problems printing. Basically I removed that weird thing next to the cat paws. Hope you like it.
The model shown in the picture was printed using a 0.6 mm nozzle and 0.4 mm layer height for faster printing but you can also try it out with a smaller nozzle. Let me know how did it go in the comments.
Infill: 15%
Bottom Layers: Minimum 2, 3 recommended.
Happy 3D Printing :-D
License:
Creative Commons — Attribution
Miguel2811
