Shoebill Stork with Finger Guns

What is this?

I don't even know, really. It's a shoebill stork, but with finger guns. 

Why did I make it?

I have a friend who hates shoebill storks, and I thought to myself “how can I print a shoebill stork, but even worse?” I think I'd reasonably call this a success. I just merged portions of each of the two remixed meshes together.

How should you print it?

Print settings that I used for this print on my X1-Carbon:

• Material: PLA
• Layer Height: 0.20mm
• Infill: 10% Gyroid
• Support: Definitely enabled. I used the tree(auto) support in Bambu Studio which worked out nicely.
• Brim: 5mm outer brim. I added this just to be safe since basically the entire model was suspended by the support structure and I wanted some extra confidence in my bed adhesion on the Bambu cold plate.
• Print orientation: Back of the model was face-down. This nicely left all of the support interface along the backside.

This is my first upload :) There are some areas that could have been smoothed out, but I'm fairly happy with the outcome.