30mm RC Fan Shroud for 1:8 brushless motors

Made for the intention to be used with 1:8 40-42 diameter brushless motors

Update 31.5.2023:

• changed the shroud that debris doesnt get stuck between fan and motor
• added the lightweight version

Requirment to assemble:

• 4x m3 nuts (no nylock!)
• 4x m3x16mm screws
• 2x 3,5mm zipties

Install:

put 1 nut into each slot on the side where the fan screws go through, then mount the shroud by putting 2 zipties  through the 2 channels on the “open” side of the shroud.

if you have issues w. loose screws use thread lock.

printed mine w. flex material (TPU), works like a charm. plus it dampens the fan on hard bashing.

im looking to do a 40mm fan version as soon as possible. also a light weight version, so be patient

Happy Printing :)