BTT TFT35 v3.0 case for Voron Switchwire

Print in your favorite fillament. Infill doesn't matter as the case is thin. Use threaded inserts in the two mount holes and secure from behind the Switchwire's OEM panel mount.

Update 5/29/23: The panel sat a little high and interfered with the doors. I changed it to sit lower, which works perfectly with the roughly ½" (12mm) high feet on my Switchwire.

Klipper config with BTT SKR v1.4 Turbo (non-turbo is the same):

[board_pins]
aliases:
    EXP1_1=P1.30, EXP1_3=P1.18, EXP1_5=P1.20, EXP1_7=P1.22, EXP1_9=,
    EXP1_2=P0.28, EXP1_4=P1.19, EXP1_6=P1.21, EXP1_8=P1.23, EXP1_10=<5V>,
    EXP2_1=P0.17, EXP2_3=P3.26, EXP2_5=P3.25, EXP2_7=P1.31, EXP2_9=,
    EXP2_2=P0.15, EXP2_4=P0.16, EXP2_6=P0.18, EXP2_8=, EXP2_10=
[display]
lcd_type: emulated_st7920
en_pin: EXP1_4
spi_software_sclk_pin: EXP1_5
spi_software_mosi_pin: EXP1_3
spi_software_miso_pin: EXP1_6
encoder_pins: ^EXP2_5, ^EXP2_3
click_pin: ^!EXP1_2