May 29, 2023
Description
Hello!
Since I didnt find a mount for the ADXL345 from Kusba, I made one myself.
I'm new to 3d printing and especially CAD but I tested the mount and it works.
It is designed to hold the Kusba with double sided tape, it fits snug and doesnt move around (at least mine did not), the double sided tape I used was around 1mm thick, thats why theres a small indentation in the middle, the hole is to push it out again.
It fits on the headbreak fan and you dont need any additional screws, just use the one that holds the Fan cover and the fan.
If you have any suggestions for improvements feel free to tell me.
License:
Creative Commons — Attribution — Noncommercial
7
Julian Weiss
