June 6, 2023
Description
Two options, a simple tower (that is larger) and a more compact option that requires that you bend the pin and add a pin-guard (to prevent the pins from shorting out). Neither option require any soldering.
Prints easily without supports and works fine with 0.3 layer height.
The T-Camera-Plus can be optionally screwed on to the top part of the case using M1.4x4 screws and the bottom part of the case be top part using M1.7x10mm
Source code and written documentation here: https://github.com/3rdIteration/Jade/tree/diy-camera
Video guide for assembly here:
License:
Creative Commons — Attribution
CryptoGuide
