Pink Peony Filament Painting

Another 4 Color HueForge model.  This time a pink peony made with very common colors.

Print at 0.08mm layer heights, 0.16mm first layer.  90%+ infill (I print at 100%)

Black until layer [email protected]

Blue until layer [email protected]

Red until layer [email protected]

Then White.

This is a true blending model so more transmissive filaments are better, though I'm certain others will work, avoid special filaments and stick with the plain ones for the best results.  SUNLU White filaments tend to be more transmissive and are a good choice.  You can swap the blue one layer earlier if you want a slightly brighter flower.

Use the exact numbers in your slicer to match up properly.