May 30, 2023
Description
Center cap I designed for my Enkei RPF-1 wheels. The wheels these were designed for have a 65mm opening. I included the original fusion file that has paramaters that should allow you to tweak most things. It's probably not perfect but it should get you most of the way to what you need.
The retention mechanism is an o-ring in a groove. For this size I used a 65mm OD o-ring, 3mm thick.
I recommend ABS or better. PLA could be ok, but I wouldn't.
License:
Creative Commons — Attribution — Share Alike
8
Sqwrly
