July 22, 2023
Description
Bambu Lab X1C/P1P Nozzle Wiper with 2mm Silicone sheet.
Print the design with higher temperature materials like PETG… ABS, ASA
Recommended to print the design laying on the side.
Cut 14x17 mm rectangle from 2mm silicon sheet.
Insert the silicon sheet into the groove.
Use the original screw from the bambulab PTFE nozzle cleaner, to fix the clenar in the printer.
And it's done.
2023.07.22: Added version II
Lowered the overall 3D printed part height to prevent any filament sticking on it.
For this design, you need to use smaller 14x14x2 mm silicon sheet piece.
You can use 4 edges of the silicone sheet while it wears out.
I have the 2mm silicon sheet from aliexpress:
https://www.aliexpress.com/item/1005004715715286.html
Rated for 200°C but it can handle higher temperatures check comment section.
Additional higher rated silicone sheet from roadshow@roadshow_441674
Aliexpress Link for Silicone Rubber Sheet rated for up to 250°C:
(make sure that 2mm thickness is selected)
https://www.aliexpress.us/item/3256804210227859.html
License:
Creative Commons — Attribution
7
Sealight333
