Raspberry Pi Power Splitter Case Add-on

Raspberry Pi Power Splitter Case Add-on

This thing is an add-on case for the Raspberry PI Case linked below. When working with this case and the Raspberry Pi, I found that I needed more 5V and 3v3 Source pins and so I decided to add a small breakout board that houses more connections to power all my sensors that I have plugged into the Pi.

Equipment List

The following parts are needed to complete the assembled thing:

• 1 x 3D Printed Raspberry Pi Case
• 1 x 3D Printed Case Bottom
• 1 x 3D printed Case Lid
• 1 x Soldered Veroboard
• 2 x M3x16mm Bolts
• 2 x M3x35mm Bolts

Useful Links

As for sourcing the individual parts used in this thing, the following links may be helpful:

• Assorted M3 Nuts and Bolts
• Veroboard
• Dupont Connectors
• JST Connectors
• Flexible Tinned Wire
• Raspberry Pi Case Modular Mount

Print Settings

Printer Brand:

Prusa

Printer: 

I3 MK3S

Rafts:

No

Supports: 

No

Resolution:

0.4mm

Infill: 

5%

Filament:

PrimaValue PLA Black

Notes:

For best results add a brim.