Music Box "He's a Pirate"

Video: 

(I was spinning a bit fast, at x0.75 speed it sounds better in my opinion :) )

Material and Settings: 

All parts were printed with a Prusa MK3S and printed from PLA. The layer height was 0.3mm (smaller is of course always possible and improves the look) 

Support structures were used for the crank handle and the Roller. The crank handle was placed on the print bed with the movable knob facing upwards during printing. The support structures in the hexagon opening were left out. The roller was placed with the gear wheel closer to the print bed. 

I also set 4 outer contours for the springs to make them more stable. 

Assembly: 

The springs were inserted at a print stop when the Main Body was printed. Then press the roller into the openings provided for this purpose (be careful otherwise the holders on the roller may break). The last thing to do is to put the small gear and the crank together in the hole. 

Have fun trying out my Music Box :) 

Releases:

31.05.23: Initial Upload 

01.06.23: Few small changes for easier assembly