Aquarium Hang-On Planter

This basket is intended to hang off the side of larger (>55 gallon) fish tanks. Any fish tank with a plastic brace around the edge should do.

I designed this to use to put plants in, but you put activated carbon pouches, bioballs, etc

I would advise against printing this with PLA, since some aquarium lights emit light in the UV spectrum, and PLA degrades in the presence of UV. And while the filament itself may not be harmful when it degrades, the pigment  or any additives in the filament may be.

I would instead recommend printing in either PETG or ASA

Print requires supports