June 1, 2023
Description
This is built from scratch in fusion 360 based on a broken gripper / finger for my 150mm (8") quick ratcheting bar clamp. Print with the pad to the build plate as that gave it optimal strength for my application.
| Print Settings | Setting |
| Walls | 5 |
| Layer Height | 0.2mm |
| Nozzle | 0.4mm |
| Material | PLA+ |
| Infill | 50% |
| Supports | None |
| Other | You should probably use something other than PLA but I tried it to failure and the clamp couldn't put enough pressure to break the PLA+. |
License:
Creative Commons — Attribution
8
3DJourney
