- Sadly it uses a lot of support material to print
- .2-.3 layer high recommended
- can take up to a week to print
- there are no side panel stl files yet, if I see there is interest in the car and enough people ask for the side panels I will add them
- for all of the pieces they have one or two letters assigned to a a piece
- drill bits and taps are recommended for assumably
- also some thin welding wire to attach the two half's of the side together
- all aluminum panels are held on with m2 screws
- axial components are what are suggested to be used in this build
- print with higher tensile strength materials such as PETG or ABS or carbon filled nylon, PLA is not recommended
- If have any questions comment on the file
License:
Creative Commons — Attribution — Noncommercial — Share Alike
KAD Designs
