Bambu Lab Easy Side Spool Holder for P1P, X1C, ARC enclosure

An easy-to-print side spool holder for Bambu Lab P1P and X1C. Initially designed for the ARC enclosure, it will also work on X1C and barebone P1P. 

BOM:

• M3x8mm - 1pc
• M3x10mm - 1pc
• ptfe tube OD4mm - 87mm

Instructions:

• This part is designed to be rigid and would do well with rigid filament ie PLA, PLA+, ABS and ASA
• I would not recommend PETG or Nylon. 
• You may need to add X&Y compensation if you are printing with ABS to counter shrinkage
• Print with no support needed. (see image). I have included a 3mf file with print orientation. 
• Print → Insert ptfe tube → Mount to frame → Mount the spool. Easy

There is no Patreon or OnlyFans (hahaha). However, if you like my designs and want to contribute to my coffee addiction & help fund the filaments I need for prototyping, a contribution to my Ko-fi or paypal.me will be greatly appreciated. 

Caveat

As with all my designs, it may and may not work for you. So print and install at your own discretion.