Junkers Celsius (etc) side covers

Covers closing the side openings in the Junkers boiler casing. 
Mounted with magnets (easy to remove) 6x2.5mm (or 6x3 too)

There are many places for magnets, 3 were enough for me to stick to the housing very well. At the back of the holes for the magnets there are small holes - to be filled with some glue - but (for me) it was enough to push the magnet into the hole with pliers, it holds itself without the help of glue

I attach two versions - one "normal" with the same size as the metal casing of the boiler (i.e. - the insert is up to the wall), and a slightly shorter version which you can see in the pictures - I have tiles on the wall, so the insert is 6mm shorter

Printed on BambuLab from PETg white, with PLA as support interface - everything is setup in .3mf files.