Chicco Deluxe baby monitor support

I wanted a way to mount the camera of the Chicco Deluxe baby monitor on the side of the bed without putting screws or glue on it.

I came with this c-shaped holder that slides over the end of the bed and gives a view of the entire bed.

The camera easily slides into the 2 protruding tabs.

The clamp is slightly angled to keep it firmly on the bed, the maximum width is 35mm, if you need other widths feel free to ask.

For print settings I recommend at least 2 walls and 15% infill globally.

I printed the two tabs at 100% infill with cura “support blocker” and “modify settings for overlaps” features.

I printed it on its side like the 3d model, this way the amount of support required is minimal.