Hoyt St puck remote Batwing XL case 3mf

Original creator is AaronTech2 from Thingiverse. https://www.thingiverse.com/AaronTech2


I initially printed it flat on the bed and it wasn't horrible but then I tried angling the pieces at a 45* angle with a raft and slim supports(some auto, some custom painted) and it came out even better. This 3mf is what I came up with for optimal print settings and object positioning. I used Polyterra matte black PLA, Bambu X1C, 0.4mm nozzle, 0.12mm layers, 215*/55*. The only issue I've had is trying to get the print looking good where the supports contact the object. May need to use smaller interface Z height or use a support filament preferably. If you plan to sand and paint then this isn't a huge deal.



“This is a larger version of the original Bat Wing case for the Hoyt Puck remote. This is a alternate case I created for the popular Hoyt Street Puck remote for esk8. Made to fit your hand a little more ergonomically. This uses 4x M2.5x20mm button head bolts to hold it together rather than the stock hardware. I used a paracord as the leash. Enjoy!” - AaronTech2