Galaxycore Remix of Master3D's Masterspool

The Galaxycore of the Masterspool is a good idea, but the model had two problems: 

• the tips of the wings are too thin and break off easily
• the thread had some errors in the stl-file (you can see them if you zoom in in your slicer), so it didn't print proper. 

I have shortened the wings a little bit, so the tips are stronger. The tension of the Galaxycore itself is the same. 

And I redesigned the thread (that was a nightmare, because it' not a standard thread).

Update 2023/06/12:

I updated the 60mm-Version, because I realized, that the first version was too stiff. Now the diameter is smaller, so it's easier to put the galaxy-core in the refill ring. I also added a Brim-version. The small Brims at the wing tips prevent it from warping and are easy to remove. 

If the other versions doesn't fit, please let me know! I only have Bambu-refill here, so I'm not able to test the other versions.