Large angled desktop speaker stands

Update 6-7-23: Added a new file which is a slightly longer and wider version that matches the width of the Kali IN-5 better(200mm wide) and is slightly longer than my original upload also. Also did some minor modifications to the part to compensate for the adjusted scales. And made larger and longer pegs with more tolerance for connecting the parts easier.

I put strips of 1/16" thick neoprene adhesive foam on top and bottom of my stands for more vibration reduction and less chance of speaker or stand sliding around, but it is not necessary. I also used super glue to connect the 2 pieces permanently.

________________________________________________________________________________________________________

I remixed some angled speaker stands to fit my Kali IN- 5 studio monitors which are a very large 5" monitor, more akin to a 6.5" or bigger speaker. I cut the model in half because it was too long to print in my Bambu X1C and added peg connectors so the two pieces connect together nicely. I believe I angled them around 4.25* as the original file was 15* which is way too much unless the speaker was sitting right in front of you. You can adjust the wedge angle by messing with the Z axis scale and of course you can make the stands longer or wider by adjusting X and Y axis scale.

The file I uploaded is a 3mf. If you don't want to use the 3mf you should be able to open the 3mf and save the model as an STL.

I printed with 0.4mm nozzle, 0.24mmm layer height, 13% honeycomb infill, 5 walls, 5 bottom shell, 3 top shell. Rectilinear 9% infill works also or whatever you like.