June 5, 2023
Description
A simple stand for kyber crystals. This is designed so the crystal is suspended between the two points. It will accommodate any crystal from Batuu and custom crystals that fit the same dimensions. This was designed to suspend a crystal allowing you to get more light around your custom maker crystals. Many customs have a large amount of translucency or shimmer mica that simply can't shine when enclosed. With the addition of a backlight, your crystal collection can really dazzle.
Designed to be a quick, simple and inexpensive print.
Simply glue the rear panel on and you're good to go.
Printer Brand:
Creality
Printer:
CR-10
Rafts:
No
Supports:
No
Resolution:
.2
Infill:
10
Notes:
This is designed to be a quick and easy print to allow for multiple jobs back to back.
Collector first, maker second
This came about as I struggled to photograph some of our own custom designs that we sell. Before becoming a maker, I was a collector. Over time, I've made a number of different stands to fit a number of different situations.
The Suspension stand is designed to let a crystal float between two points. This allows more ambient light to pass through the crystal so that the mica and translucent work can really be noticed. Small, cheap and quick to print. They also fit side by side if you have several to display.License:
Creative Commons — Attribution — Noncommercial — NoDerivatives
Tinkerers Cove
