Amcrest Wall Mount Bracket for Dome Cameras

The is a wall mount bracket designed to serve in place of the Amcrest AMCPFB203W, tested with Amcrest IP5M-T1179EB-28MM (the model of camera I have). The cavity inside is large enough to fit the ethernet connector and the camera's permanently attached cable. 

This mounts directly to a wall or fence via four screw holes on the front. I would install it in this order:

1. Attach camera mounting ring to bracket using two screws;
2. Pull ethernet cable through the back of the mounting bracket;
3. Connect the ethernet cable to the camera using the provided waterproofing hardware;
4. Mount the bracket to a wall or fence using four screws - use caulk if needed on the screw holes to ensure your wall stays waterproof;
5. Slide the camera onto the mounting ring.

Edits (06/06/2023): I uploaded some photos of the bracket installed with a camera and I had trouble getting the two screws in at the bottom because I reused two screws from the old bracket (which will be installed elsewhere). Mostly an issue with my screws and the drill, not the print. Will remedy when I have some more time.