October 1, 2023
Description
The key box can be printed for instance on a Bambu Lab X1 Carbon in two runs, as long as you don't let it do the flow calibration.
The pin of the hinge is a piece of filament, glued only in the top knuckle with a little drop of superglue, but any appropriate glue can be used.
It's a simple design, but I printed at least 7 or 8 prototypes with different hinges and latches and doors before I came to this one.
Version 2
The hinge is bigger, therefor stronger, it prints better and it is easier to thread the pin through the hinge.
Furthermore, there is now a good working latch.
License:
Creative Commons — Attribution — Noncommercial — Share Alike
MartinSpajaard
