This is a modification of Martin's Victorian-Style Lion Head Knob that allows mounting with a M3 screw and DIN 562 square thin nut.
Printing instructions
- Print the .stl as-oriended, optionally adding a brim if needed.
Assembly instructions - Nut insertion
- Gently insert the nut into the rectangular opening on the side and push into position.
- You can use a M3 screw to push it all the way in (it's going to stop halfway).
- You can push it out by inserting an M3 screw from the other end.
- Optionally, you can add a dab of glue after the nut is inserted (from the insertion end) to secure it in place permanently.
License:
Creative Commons — Attribution — Noncommercial — Share Alike
Adam
