Desktop CPU Case Utility Tool Holder

After setting up my printer in a space-confined area, my tools and bits got messy on my small workbench quickly. This Elfa-inspired solution is completely unique and works well for my setup. My desktop CPU should be able to ventilate with no repercussions in spite of the added material, so please re-consider if your machine is constantly trying to shed off heat and ventilation.

Print instructions

See the video here:

See this design on Thingaverse:
https://www.thingiverse.com/thing:4698035

**Important NOTES

• A few of these .stl files may be too large to print for some 3D printers (SWING ARM, ALPHA/BETA CENTER SUPPORT). These were designed for a Prusa MK3S.

• This design and its bits were inspired by my Elfa gargae storage system, and I'm constantly improving the designs for best results. This design will be creative common so please do not consider this design for any commercial purpose. It is intended as a unique solution for household use only.

• I am including STEP 3D model for your own remixes, adjustments or suggestions. In total, I have been working on this design (mainly) for around 3 months. I will continue to update the files here as improvements come along or new tools added.

• Please watch the video for assembly instructions and an overview.

PRINTING

• Definitely stick to PLA or PET for most of these parts. I think there is a wide range of resolutions possible but I would recommend 0.2 MAX for most of the parts and the smaller details will perform better with finer detail. Make the Tool Holders out of PET for increased stiffness.

***UPDATE: I will be re-printing most of the Tool Holders with PET that is being shipped, still. I will update here later on.

For many of these parts, supports will be necessary. I will post recommended orientations soon.

If you have design concerns or questions, please comment.