June 11, 2023
Description
I've been working on this model for a while now. Is a 3D version of the current Doctor Who logo. This version needs to some glue, but some parts can snap together.
The STL's don't have tolerance, so you will need to enable the hole horizontal expansion feature on Cura or the equivalent feature on other slicing software.
The STL's are organized by color, so you can print everything in the correct colors, except for the “shiny” part that was printed with a glow-in-the-dark filament
The render was done on CADRays, and the modeling on FreeCad
If you make, show it!
BTW, if you want to use the exact filaments that i used, you can grab any white, any glow in the dark, but the blue is the Polymaker PolyTerra Saphire Blue
License:
Creative Commons — Attribution — Noncommercial
PowerlessMainframe
