June 14, 2023
Description
Flower of Life Pendant
Dimensions: 66 mm x 73 mm x 3 mm
Print Settings:
Printed on Ender-5 S1
Used Filament: eSUN PLA+ Black
100% infill (depends on scaled size)
0.4 mm nozzle
0.2 mm layer height
Ironing enabled
100 mm/s print speed
Prints came out great, there were small plastic chips after ironing but they can be easily removed with little sanding. Since model's height is short, layer lines are hardly noticable.
Even with the ironing enabled, both sides can be used on front.
License:
Creative Commons — Attribution — Noncommercial
AxelDnz
