Bottles for use with PCO1881 caps

For our vitamin supplements, I wanted small containers to sort into daily portions. I drink a lot of soda from 2 litre bottles and was looking for a use of the caps that are frequently discarded. Using the thread model from Terahurts3D (cults3d.com), I designed and attached bottles. For our own use, I printed two batches of the smallest version, one plain batch, and the other batch with a color stripe. While I was at it, I configured other sizes that might be useful.

The bottle walls are .8mm thick for two passes of a .4mm nozzle. 

I printed in Bambu Studio, PETG with:

• .2mm layer height
• aligned seams
• arachne wall generator
• 10 wall loops (this really makes model solid throughout)
• concentric top and bottom surface patterns
• variable layer height
• no supports
• auto generated brim

NOTE: these ARE NOT waterproof in the manner I designed and printed them. For our use it was not a requirement.

--------------------------------------------------------------------------------------------------------------

Bottle sizes are embedded in the filenames, ie…

 Soda Cap Bottle 1_50T 1_25ID

=    1.50" tall (excluding threaded neck) and 1.25" inner diameter