June 17, 2023
Description
This is a parametric door threshold ramp to help robot vacuum cleaners to get over door lips.
If your printer can produce good bridges then I recommend printing it in the finished orientation to create a surface for the wheels of the robot to grab on to. If you have a textured plate then that will probably work as well.
The f3d file is parametric for the following parameters:
There will always be a leg in the middle and reducing the AmountLegs parameter will not remove it.
You can tip me on Ko-Fi if you want to support my work.
Change log:
2023-06-17 - Changed the extrusion setting so there isn't any dovetails legs that needs to be cut because they are longer than the height of the ramp.
License:
Creative Commons — Attribution — Share Alike
Tysonsw
