May 15, 2024
Description
Follow the instructions below.
It's a heavy tool so pegs and backplate must be printed at 100% infill. The rest can be made at 15% or 25% infill. Suggest adding an infill modifier at 100% for the area shown in my slicer picture. Print in orientation shown in pic with supports turned on. I find tree supports work best. Regular PLA is fine.
UPDATE: Added a Rev 2 that has a cutout for easier time lifting the saw out of the holder. I suggest using this one. Also added a presliced/supported 3mf for bambu users.
License:
Creative Commons — Attribution
8
NathanFrog
