June 11, 2023
Description
My shoehorn had no place to be. So I designed this little holder.
It keeps the Shoehorn firmly on the wall with the help of 2 10x10x10mm magnets. So it only works with metal shoehorns.
I printed it with FLEX 98a, but it should also work with PLA.
I mounted it with a slightly overdimensioned screw on the wall. It should also work with Tesa Powerstrips. If you need changes on the model, just contact me.
https://cad.onshape.com/documents/7e291d9be845622356dec391/w/7bfd2865368b459472b753f4/e/9cb2e9e5cb7b5379961bf4b3
License:
Creative Commons — Attribution — Noncommercial — Share Alike
Bernhard
