Ender 3 / 3Pro / 3 v2 Feet Riser with 5 designs to choose from

I have decided to migrate some of my old projects from Thingiverse to Printables. 

Introduction

5 designs to choose from, Tri, Star, Hexagonal, Palm Tree and Plain. Each foot uses 1 set of M4x8 hex screw + T-Nut. You can also install without the M4 screws as the fitting of these rise feet is very snug. It also depends on how well your printer is calibrated. If it is too tight, use a soft mallet to tap it in.

I only upload the design for one corner, you need to print 2 pcs of the stl and 2 pcs mirrored using the slicer. I have orientated the design to print flat on the bed. 

The stock rubber feet can be reused as I have made a recess in the base for them. You will need to trim slightly to fit, 1mm on each side. (or 2mm on one side)

There is no Patreon or OnlyFans (hahaha). However, if you like my designs and want to contribute to my coffee addiction & help fund the filaments I need for prototyping, a contribution to my Ko-fi or paypal.me will be greatly appreciated. 

Caveat

As with all my designs, it may and may not work for you. So print and install at your own discretion.