Pintsize 2.0 Plaque

I'm no 3d artist, but I made a wall plaque of Pintsize from Questionable Content. Took a lot of effort to make it look acceptable in the slicer and it printed rather well in the end. This was my “ok, I've done a print with a ridiculous amount of color swaps” print 😅

You can load the pintsize-[color].STLs all at once and use them as a single model, then change the material to match the colors indicated. Also included is a model of just Pintsize and a single STL with the entire assembly (-complete).

You could alternatively break it in to it's various objects and print per-color, but that might get hairy with some of the pieces and I have not tested this. It is intended to be printed as an AMS/MMU print.

Print Settings

Supports: Yes

Resolution: .16

Infill: 20% Support Cubic

Filament: Bambu Lab Basic Green, Hatchbox PLA (True White, Pure Black, Medium Wood, Silk Gold)

Notes:

The 3MF provided is for Bambu Studio and has my material profiles in it, please double-check them for your own accuracy!

I also scaled Pintsize up to 133% to help with the thickness on the black lines and changed the line width to ensure they printed properly, as detailed in the two screenshots.