Wyze Cam Tower

I got a hold of a Wyze Cam v2 that I wanted to use as my Klipper camera, but needed it at a very specific height, as well as supported so I could turn it sideways for vertical timelapse videos. Having designed other webcam mounts that bolted to the Y gantry on my ender, I wanted this one to stand alone (less vibration). I doodled around in TinkerCAD and came up with this.

Camera base slots in with just enough snugness to hold but not be difficult to install or remove. I was really happy it worked so well on my first shot after just taking calipers to the camera.

Two versions, one with sharp angles ("45s") that only requires supports for the very top (where the camera base slots in), one with rounded features that may additionally need supports at the top of the arches. Pick your style.

Has two holes for screwing it down if you don't want to bump it around, alternatively you could use double-sided tape if you wanted. Would probably stick pretty well to a wall if you used both screw holes, but as they'd intersect don't use too long a screw.

Print Settings

Printer:  Ender 3

Supports: Yes

Resolution: .2

Infill: 20% Adaptive Cubic

Filament: eSun PLA+ White