Ender 3 Sprite X Axis Endstop Bracket

I took BreachAndHole's model and initially just removed the top cable management arm since I wouldn't be using it. After printing, I had to take the bracket out in the shop and bore out the holes since they were too tight and bit the bolts, making it impossible to actually torque against the stepper itself. Increased the diameter of the holes from 3 to 3.2mm and made them more round so this will not be a problem.

Print Settings

Printer: Ender 3

Supports: No

Resolution: .2

Infill: 25% cubic

Filament: Hatchbox PLA Pure White