Raspberry PI 3/4 mount for 30x30 profile

I remixed this design to fit the PI into the profile of the Prusa MK3s+.
I like to have the PI naked with the Argon fan hat on it. It keep cool and silent operation. Also, the location of the PI is very convenient.

To fix the print to the frame you need to print two of these:  https://www.printables.com/model/232808-t-slot-nut-for-prusa-i3-mk3s-and-prusa-mini-30x30-
And two 12mm M3 screews with the nuts.
The model is compatible to Raspberry 3 and 4. To fix the PI to the model you will need two 5mm M2.5 screws and follow these instructions
First, secure the model to the frame with the T-nuts but do not overtighten the screws. The model must be able to slide on the frame.
Second, fix the raspberry PI using one of the two M2.5 screws, in the hole next to the usbc connector, but don't tighten the screw yet.
Then, reposition the model and the raspberry in the desired position on the frame.
Then tighten the screws that secure the model to the frame, you can rotate the raspberry to free up space and work more comfortably.
Finally, fasten the raspberry to the model using the other M2.5 screw just behind the network connector.