Wrist Watch Print In Place Customizable

Designed with a 0.4mm clearance between hinge segments

I recommend printing a test length before printing the full model

1. Split the model into PARTS
2. delete all but the last 3 links on the short end
3. the last link is there to test the tightness of the clasp mechanism (it should unsnap easily after printing)

Print Instructions

1. 0.12mm layer height
2. 0.4mm nozzle dia
3. PLA 205C 100% Fan
4. I recommend Archimedean chords as the top and bottom layer pattern
5. Orientate the model so it fits on the bed
6. Split Model into PARTS (this will allow you do delete parts while keeping everything arranged) 
7. delete unneeded parts 
   1. extra links from long end
   2. last “test” link from short end
   3. MMU insert if not needed

• NOTE: if printing blank face you can add your own custom text with Prusaslicer's custom text feature
  • Right click model and select add part → text
  • drag text where you want it and slice

Customization Instructions:

• MMU Insert: dia 28.4mm depth 2mm
  • insert can be printed separately and press fit into face of watch