Eero Pro 6 Outlet Cover Wall Shelf

I was reading through some mounting information on the Eero 6 Pro and saw that it should be mounted horizontally because of the antennas. I couldn't find a good mount so remixed a great shelf for the Eero 5 but used the proper (larger) measurements for the Eero 6 Pro and embedded an electrical outlet cover so that I wouldn't have to drill new holes into the wall.

I realize that if you plug in the Eero into the outlet, you can't use the other outlet. I had a unique situation where this worked for me. Hopefully it will work for others.

I also remixed a mount that isn't connected to an electrical wall outlet cover (just the shelf and mount). https://www.prusaprinters.org/prints/50507-eero-6-pro-horizontal-wall-shelf-mount

Print instructions

I printed this with PLA and used supports under the outlet plate.