52 to 70mm PCD simracing wheel adapter

2024-08-19 Update

Also see this model.

-----

As snapoffs are epensive I designed this adapter and extension for my Fanatec BMW GT2 wheel to be mounted on my VRS DirectForce Pro wheelbase.

52mm (Fanatec) PCD to 70mm PCD adapter
Extension lenghts 30 and 100mm.

I can provide custom lenghts of this adapter if needed, let me know in the comments.

Print instructions

Print with high infill and high temp for good layer adhesion and strenght. My first print in 0.3mm @ 200C PLA and 20% rectilinear infill failed after 10-15h of use (100mm extension).

My next print was made in 0.15mm layers @ 215C PLA with 35% gyroid infill with some solid (100% infill) cylinders placed inside the print (with Prusaslicer/Superslicer) for added strenght. And this is still working for me.

12xM6 screws and nylock nuts are required for this.