Motherboard Display Stand

Perfect for displaying or storing your motherboard. 

Print 2 legs and one crossbar. It is a reasonably easy print, so the settings are up to you. I printed with the following:

• PLA
• 0.6 nozzle
• 0.3 layer height
• Arachne
• 2 walls
• 3 top and bottom layers
• 15% Infill

If you have an exceptionally heavy motherboard, consider bumping up the infill to add some weight.

This remix was not just scaled up from the original; the angle was changed, braces lengthened and adjusted, and a notch was added to support the motherboard properly. The original does work well for ITX boards though.