NVG Display Stand

### Description/ Instructions
This display stand allows you to display your night vision googles for foto/ decoration. 
This stand is compatible with all standart dovetail and bayonet interfaces and also includes 2 special adapters to allow mounting of lucie and PVS-21 goggles.

### Needed materials

M3x15 bolt 
M3 Heat seat thread insert

### compatibility 
tested with 
 PVS-7 Bayonet mount
 PVS-14 J-Arm
 Lucie
 PVS-21

### Printing
You should have a pretty good calibrated printer to start with, specific settings aren't that important, as this adapter recieve to much stress.
for best results, try printing at a lower layer height.
I printed my example with a wall count of 4, but i don't believe this is really necessary. The reccomended print oriantation can be seen in the "print orientation.png" in the media folder.
After printing remove the supports structures and set the M3 thread insert into the Arm.
The filament i used is Esun PLA+.

 printer settings
 nozzle size  0,4mm
 layer height 0,2
 Nozzletemp  205-225 (whatever works for you)
 Bedtemp   60 (whatever works for you)
 walllinecount 30 (whatever works for you)
 supports   enabled