There are 4 different upgrades/mods.
TPU feet
- prevents the sharp edges of the bottom of the drill press from scratching your work table
- reduces vibrations
- requires four 4x7x6mm heat-set inserts and four M3x8 bolts
Mounts
- allows the user to easily mount objects onto the metal base
- requires four M4x16 bolts
Heat-set brass insert press / soldering iron holder (added 2023-06-17)
- easily insert heat-set brass inserts into your 3D prints
- can be printed with PLA, even though it has a low melting temperature. You may want a more heat resistant material if you are going to use it for long periods of time
Small enclosure (added 2023-06-17)
- prevents tiny bits from flying everywhere while drilling, while still allowing the handle to be pulled all the way down
John
