TempTower Easy and fast to print (0.4mm Nozzle) 190°C up to 320°C

Here are some Temp Towers which you can easy use in the range which is needed in your case.

You can coose a Temp Tower which is suitable for you. Each Temp Tower has a spread of 30°C which should be enough to calibrate your filament.

The Temp Tower is designed for a 0.4mm nozzle at a layer height of 0.2mm

The Temperature should be changed at these layers:

• 50
• 100
• 150
• 200
• 250
• 300

check you material temperature. This should be set to the max amount which you want to print. Otherwise you can change your extrusion temperature at layer 5 which is directly after the base.

I will post some instruction in the nearby future