March 28, 2025
Description
Build to connect and disconnect my laser cuter ventilation and my 3d printer's ventilation.
You will need 16 5mm x 1.5mm magnets.
Make sure to check the orientation when you glue them in.
Each side must have the same, dedicated pole on the top.
E.g.: Male: north pole, Female: south pole.
It can be opened by rotating
Print with the magnets side up and add a brim inside of 0.15 to 0.2mm to stabilize the print.
License:
Creative Commons — Public Domain
8
Tobias Stanzel
