June 17, 2023
Description
Bring your Gridfinity into the 4th dimension! Place your bins on multiple sides, allowing for tall objects such as markers or hex keys to be stored where vertical height is limited, such as a drawer (the 4th dimension).
This specific model allows for 3 markers to be stored in a single bin. Push them through the oval hole in the back and their clip should grab onto the divider rail. As a bonus this version stores the marker cap while the marker is in use! Sharpie brand fits best but off brand works too.
Printing directions: In your slicer place the print so that the oval opening is upward, and the 2 square openings are down against the build plate. Printing in the wrong orientation will result in the divider wall being too brittle (or so I've been told…).
Other 4D Gridfinity models of mine:
License:
Creative Commons — Attribution
9
Cullen Webb
