Labists ET4 Bed Wire Relief

Modified the original Thing to suit the Labists ET4. The bed on the Labists ET4 has the wires soldered direct to the heated bed but the cable management is rubbish and likes to wrap around the Y endstop.

How to fit:

Thanks to Penguin President for pointing out the need to remove the glass plate and unscrew the existing wire clamp

This replaces everything at the bed and directs the wire to the side. You just need 2 x M3 bolts and nuts.

Print instructions

Print Settings

Printer: Any

Rafts: No

Supports: No

Resolution: 0.3

Infill: 25%

Filament: Ideally ABS or ASA