June 17, 2023
Description
First off, big shoutout to Macscott56 for the original! Recently purchased a Crescent Crew Kayak and wanted the accessory rails. I modified the original to print sections to get the overall lengths I needed.
If you make it, post it! :)
Printer Brand:
Creality
Printer:
Ender 3
Rafts:
No
Supports:
Yes
Resolution:
0.2mm
Infill:
80
Filament: Duramic PETG Black
Notes:
First off, PRINT IN PETG or ABS! Make sure you have 6 walls and 80% infill. You want these to be as strong as possible. Print list as follows:
2x - YakAttack GearTrac\_2 18-inch\_Center4x - YakAttack GearTrac_2 18-inch_End
2x - Yakattack_Geartrac_8
2x - YakAttack GearTrack 13-Inch
All but Yakattack_Geartrac_8 have a slot design to connect them together. They do not need to be glued, just held together to help keep them aligned when installing.
License:
Creative Commons — Attribution
9
C0D3Man
