Ender 3 Circuit Board cover for bottom of display board

This bolts on to the bottom of the display board using the existing screws.  In the photos you will see the board that I have and the suggested print orientation.

I think on a few occasions I accidentally shorted out the board with my fingers causing the printer to reboot.   The purpose of this is to create a protective “cage” around the circuit board so that I don't have to worry about accidentally touching the circuit board.

Here are the slicer settings and suggestions for printing:

• 0.2 Layer Height (Normal).
• Horizontal shells set to 0 for top and bottom.
• 15% Infill using honeycomb pattern.
• Organic (or tree) supports.
• Since I was using blue tape on my bed, I set the bed temperature to 0.
• Nozzle temp set to 205 for first layer and 200 for remaining layers.

Please post comments if you find this useful or have ideas on how to improve.