Garage Parking assist hanger (now with locking clamp)

Way to call me out PSomeone! ;-)

Here's the bracket remodeled to include a clamp setup.

I made the winder box separate from the bracket to be glued on, hopefully this will help minimize support material.

to use: pass your cord from the bottom out through the top hole, this allows you to pull down on the cord using the wide of the winder box as a pulley. When you have it at the right height twist in the cap and it presses the washer against the cord immobilizing it!

Thanks again for the suggestion PSomeone.

Print instructions

Print Settings

Printer Brand:

Prusa

Printer:

No

Supports:

.15

Infill: